Related Products

HOME > Products > ADSS/OPGW Fitting > Communications > Hardware for ADSS > Double Suspension Clamp for ADSS

Product Name: Double Suspension Clamp for ADSS

Product Number: 009

Product Details

 

 Product Instruction:

Double suspension clamp for ADSS, adopting double-layer design, is consisted of structural reinforcing rod/outer structural reinforcing rod (dead end) in proper size and length, intended to pass axial load and disperse radial stress, to reach its inner reinforcing units through plastic jacket, so as not to impair the plastic jacket or inner optical fiber that is fragile and vulnerable. The suspension clamp has excellent anti-fatigue, including outer structural reinforcing rod (dead end)/structural reinforcing rod, two sets of suspension clamp, and matching connection hardware.

 

Function:

Intended for straight-line pole with a big height-difference and a span over 800m, one pole for one set

 

Parameter:

Configure model by cable diameter and span

 

Installation of Double Suspension Clamp for ADSS  

 

Components: anchor shackle, double suspension yoke plate, suspension clamp, U-strap, rubber clamp, parallel clevis, outer preformed rod (dead end), structural reinforcing rod

 Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

 

 

 

Installation Steps:

 Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

1.   Hang anchor shackle at the fixed point selected on pole, connect double suspension yoke plate, leaving it natural;

 Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

2.   Make two suspension marks right down its corresponding cable according to screw hole position at the bottom of double suspension yoke plate;

Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

3.   Take a single structural reinforcing rod, make its two installation color marks aligned respectively to cable’s two suspension marks made in step 1, wind 3-4 pitches from anyone of the installation marks towards both ends;

 Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

4.   As former step, wind the 2nd structural reinforcing rod around cable;

 Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

5.   Complete winding the rest structural reinforcing rod as above (keep both ends of structural reinforcing rod loose);

 Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

6.   Complete winding both ends of structural reinforcing rod by hand,

 Picture of Double Suspension Clamp for ADSS installation,product functions and applications.

ensuring it even and orderly;

 Suspension Clamp for ADSS installation step,product functions and applications.  

7.   Centralize the alignment color mark of structural reinforcing rod, split the 2 sets of rubber clamps into 2 parts, one right, the other left, to clamp them outside the structural reinforcing rod, and fasten up with gum tape;

  Picture of Suspension Set for ADSS installation step,product functions and applications.

                      Correct Installation

8.   Make suspension installation mark of outer structural reinforcing rod (dead end) aligned to rubber clamp center (ensuring the surface of outer structural reinforcing rod(dead end) coincided with that of rubber clamp), wind the outer structural reinforcing rod (dead end) on each side of rubber clamp for 2-3 pitches;

 

Picture of Suspension Clamp installation step,product functions and applications.

          Incorrect Installation

Not to wind outer preformed rod (dead end) on rubber clamp like that;

 Picture of Hardware for ADSS (Suspension Clamp) installation step,product functions and applications.

9.   As step 8, wind the 2nd outer preformed rod on another side of rubber clamp (symmetrically with the 1st twisted wire);

 Picture of Hardware for ADSS (Suspension Clamp) installation step,product functions and applications.

10.   As former step, wind the all outer preformed rod in the same interval (not overlap, cross or distort preformed rod);

 Picture of Suspension Clamp installation step,product functions and applications.

11.   Complete winding both ends of preformed rod by hand (not use any tools to avoid from scratching or damaging cable);

Picture of Suspension Set for ADSS installation step,product functions and applications.

ensuring it even and orderly

 Picture of Suspension Clamp for ADSS installation step,product functions and applications.

12.   Aim suspension clamp center at the center mark of outer preformed rod (dead end), enchase suspension clamp outside preformed rod, leaving lug upward;

 Picture of Suspension Clamp for ADSS installation step,product functions and applications.

13.   Enchase U-strap onto suspension clamp from bottom to top, tap it in place by hand;

 Picture of Suspension Clamp for ADSS installation step,product functions and applications.

14.   Install parallel clevis, screw up;

 Picture of Suspension Clamp installation step,product functions and applications.

15.   Install another suspension clamp and parallel clevis in the same way;

 Picture of Hardware for ADSS (Suspension Clamp) installation step,product functions and applications.

16.   Fasten the two parallel clevises severally onto double suspension yoke plate, and set up pin;

 Picture of Hardware for ADSS (Suspension Clamp) installation step,product functions and applications.

17.   Installation is over.

 

 

 Instructions:

 1.   In moving and installation, suspension clamp shall not be extruded or severely impacted to avoid from deformation;  

 2.   Suspension clamp is a matching component, preformed rod shall not be used repeatedly;  

 3.   The quantity and length of suspension components shall not be changed randomly, and shall not be used repeatedly;  

 4.  In the process of winding, it is required to operate by hand, not use any tools to prevent from damaging cable;

 5.  If in doubt, please contact us.

Facebook Twitter Youtube
Copyright © 2011 www.opgwfitting.com All Rights Reserved.
Powered by SEO | Fiber Optic Cable