Related Products

HOME > Products > ADSS/OPGW Fitting > Energy > Splices Connector > Conductor Splice Connector

Product Name: Conductor Splice Connector

Product Number: 028

Product Details

 

Application and Function:

 

When the outer aluminum wire of steel-core aluminum strand and the aluminum conductor are all broken, it may be repaired with conductor splice, which 100% mechanical strength and electrical property may be recovered.

 

 

Installation of Conductor Splice Connector

 

 

Picture of Conductor Splice Connector installation steps, product functions and applications

1.   The above is a set of connection splice used in the field, coat ethane tape on the aluminum conductor end, to prevent the conductor end from loose;

Picture of Conductor Splice Connector installation steps, product functions and applications 

2.   Brush the conductor bright and clean. Place the conductor end wound with tape at the center mark of a set of connection splice (note: if the amount in each set connection splice is different, begin from a set that has the most pieces), grasp and wind the connection splice onto conductor with thumb and other fingers;

Picture of Conductor Splice Connector installation steps, product functions and applications 

3.   Place another conductor end at center mark, keep a distance between both ends about 2mm, hold it and wind connection splice onto it;

Picture of Conductor Splice Connector installation steps, product functions and applications 

4.   Referring to the 1st connection strip’s center mark, wind the 2nd connection strip separately on both sides of center mark for 1-2 pitches;

Picture of Conductor Splice Connector installation steps, product functions and applications 

5.   Install the 3rd connection splice in the same way, and then wind the 2nd and 3rd connection splice until 2 pitches left; 

Picture of Conductor Splice Connector installation steps, product functions and applications 

6.   For convenience, split connection splice end, wind each strand onto conductor, and fasten it in place with thumb; 

Picture of Conductor Splice Connector installation steps, product functions and applications 

7.   Installation is over.

 

 

 

Instruction:

 

1.   A right model should be determined before installation;  

2.   To defer oxidization, the conductor is suggested to polish thoroughly and coat with good anti-oxygen;  

3.   It’s a fine product, to secure quality, prevent from extrusion, severe impact and deformation on the process of moving and installation;  

4.   It’s required to be operated by professionals by hand, not use any tool to avoid damaging conductor;  

5.   It’s just be used only once as instructions, in no case, it may be reused or modified;  

6.   If in doubt, please contact us.  

 

Facebook Twitter Youtube
Copyright © 2011 www.opgwfitting.com All Rights Reserved.
Powered by SEO | Fiber Optic Cable