Related Products

HOME > Products > ADSS/OPGW Fitting > Energy > Formed Wire > Formed Wire Dead-end for Conductor

Product Name: Formed Wire Dead-end for Conductor

Product Number: 023

Product Details

 

Application and Function:

 The pre-twisted tension dead end  is intended to install the bare conductor or the overhead insulated conductor in transmission/transformation power line, which is more reliable and economic than the bolt/hydraulic tension clamp that now widely used.  

 

The pre-twisted tension dead end is simple structurally. The tubular structure formed from the two pre-twisted wire legs, after installation, may wind around conductor naturally, generating great holding strength on conductor. New structure and fine design have conductor tension dead end owned reliable property. The dead end often is made up of aluminum clad steel, galvanized steel wire, etc.

 

 

Installation of Formed Wire Dead-end for Conductor 

 

 Picture of Formed Wire Dead-end for Conductor installation steps, product functions and applications.

 

 

 Installation:

 Picture of Formed Wire Dead-end for Conductor installation step,product functions and applications.

1.   Pull the conductor end toward pole, tightening it,  and pull the pre-twisted conductor tension clamp through thimble clevis;

 Picture of Formed Wire Dead-end for Conductor installation steps, product functions and applications.

2.   From the joint mark, wind the short leg around conductor for 2-3 pitches;

 Picture of Preformed Line Products (Formed Wire Dead-end for Conductor) installation steps, product functions and applications.

3.   Wind the 2nd leg, ensure an even gap between both legs;

 Picture of Preformed Line Products (Formed Wire Dead-end for Conductor) installation steps, product functions and applications.

4.   Wind both legs evenly until 1-2 pitches from its end;

 Picture of Preformed Line Products (Formed Wire Dead-end for Conductor) installation steps, product functions and applications.

5.   Split the rest of leg into two parts at the conductor place, one up, one down;

 Picture of Preformed Line Products (Formed Wire Dead-end for Conductor) installation steps, product functions and applications.

6.   Wind the structural reinforcing rod that splitted into one or more pieces around conductor one by one;

 Picture of Preformed Line Products (Formed Wire Dead-end for Conductor) installation steps, product functions and applications.

7.   Loose the tightener, to finish installation.

 

 

 

 Instruction:

 1.   To ensure its usage and personal security, a right specification must be chosen before using;  

 2.   It is an one-off product for special purpose, in no case it shan’t be reused or modified;  

 3.   It is finely designed, to ensure its property, it should be packed and kept in carton, and handled carefully;  

 4.   It shall be operated by skilled workers who are trained specially as instruction;  

 5.   If in doubt, please contact us.  

Tags: Formed Wire
Facebook Twitter Youtube
Copyright © 2011 www.opgwfitting.com All Rights Reserved.
Powered by SEO | Fiber Optic Cable