Related Products

HOME > Products > ADSS/OPGW Fitting > Communications > Hardware for ADSS > Suspension Clamp for Short Span ADSS

Product Name: Suspension Clamp for Short Span ADSS

Product Number: 007

Product Details

 

 

Product Instruction:

The tangent suspension clamp for ADSS is intended to connect ADSS cable on straight-line poles. With no concentrated stress and avoiding a bending-stress, the clamp may play a role to protect cable and assist reducing vibration. The whole set of suspension clamp contains: suspension clamp, matching connection hardware. Clamp’s holding strength of is over cable rated tensile strength for 10-20%, easy to install.


Function:

Intended for straight-line pole that span is less than 100m in ADSS erecting, one pole for one set


Parameter:

Configure model by cable diameter and span

 

Installation of Suspension Clamp 

 

 

Components: anchor shackle, rubber clamp, suspension clamp

 Picture of Short Span Suspension Clamp for ADSS installation,product functions and applications. 

 

 

 

 Installation Steps:

 Picture of Short Span Suspension Clamp for ADSS installation,product functions and applications. 

1.   Make a suspension mark on cable by a handing point;

 Picture of Short Span Suspension Clamp for ADSS installation,product functions and applications.

2.   Dismantle suspension M12 bolt, loose M8 bolt in the middle of tangent clamp, make the tangent clamp center aimed at cable’s hanging point made in step 1;

 Picture of Short Span Suspension Clamp for ADSS installation,product functions and applications.

3.   Adjust its lug upward, screw up M8 bolt in the middle of clamp, compress cable, not damage it;

 Picture of Short Span Suspension Clamp for ADSS installation,product functions and applications.

4.   Insert M12 bolt into screw hole at the lug top of suspension clamp, and through anchor shackle, screw up, set up pin;

 Picture of Short Span Suspension Clamp for ADSS installation,product functions and applications.

5.   Fasten anchor shackle onto pole clamp, set up pin;

 Picture of Short Span Suspension Clamp for ADSS installation,product functions and applications.

6.   Installation is over.

 

 

 Instructions:

 1.   Suitable for a span100m;  

 2.   Installing the product should be operated by professional;  

 3.   If in doubt, please contact us.

 

Facebook Twitter Youtube
Copyright © 2011 www.opgwfitting.com All Rights Reserved.
Powered by SEO | Fiber Optic Cable