HOME > NEWS > Minimum Bend Radius & Maximum Pulling Tension for Fiber Optic Cable

Minimum Bend Radius & Maximum Pulling Tension for Fiber Optic Cable

DATE: 2012-06-01 | SOURCE: HOPE | Click:

>> Minimum Bend Radius & Maximum Pulling Tension for Fiber Optic Cable Based on ANSI/TIA 568 (C.0, C.2, C.3)

Cable Type and Installation Details Maximum Tensile Load During Installation Minimum Bend Radii While Subject to Maximum Tensile Load (During Installation) No Tensile Load (After Installation)
Inside Plant Cable with 2 or 4 Fibers Installed in Cabling Subsystem 1 220 N 2 inches 1 inch
Inside Plant Cable with more than 4 Fiber Per Manufacturer 20 times of Outside Diameter (O.D.) 10 times of Outisde Diameter (O.D.)
Indoor/Outdoor Cable with up to 12 Fibers 1335 N
Indoor/Outdoor Cable with more than 12 Fibers 2670 N
Outside Plant Cable 2670 N
Drop Cable Installed by Pulling 1335 N
Drop Cable Installed by Directly Buried, Trenched or Blown into Ducts 440 N
( Edit: admin )
Facebook Twitter Youtube
Copyright © 2011 www.opgwfitting.com All Rights Reserved.
Powered by SEO | Fiber Optic Cable